标题： 利用标准电流反馈放大器生成高幅值短脉冲 显示英文标题

标题： Generating of short pulses with high amplitudes by using of standard Current-Feedback-Amplifier

摘要： 传统上，产生纳秒级且具有高幅值脉冲的方法是利用晶体管的雪崩效应。然而，这种方法的问题在于参数调节的可能性较差。这就促使人们寻找另一种方法：利用现代电子元件开发了一种可参数化的脉冲发生器。这些参数可以通过Windows或Linux PC进行设置。脉冲宽度可以在3...80 ns范围内调整；脉冲幅度可以在18...84 V范围内调节；脉冲重复频率可以在1 Hz到50 kHz范围内设定。 显示英文摘要

摘要： The traditional method to generate pulses in the range of some nanoseconds with high amplitudes, is the using of the avalanche-effect of transistors. However the problem with this method is the poor possibility for parameterizing. That was the trigger to look for a different way: under using of modern electronic components, a pulse generator, which is parameterizable, was developed. The parameters can be set by using a Windows- or Linux-PC. The pulse width can be adjusted in the range of 3....80 ns; the pulse amplitude in the range of 18...84 V and the pulse repetition rate in the range of 1 Hz to 50 kHz.